Laboratory Fume Hood Manufacturer in hyderabad, India

Fume Hood

Fume hood exterior: 1.2 mm G.I sheet with powder coat nish. Interior: Chemical and heat resistant with smooth nish, easy cleanable panels made of 6 mm thick FRP/Tiles. Bottom Cabinets with cupboard and one horizontal partition and shutters. Working table easy to clean & Chemical and heat resistant black granite. Single, verticle sliding type door. Balanced with counter weight, provided with 5 mm thick glass window with steel frame. Centrifugal Blower for exhaust, PVC/FRP duct pipe 200 mm dia 15/5 amps 3 pin socket cum switch. Push button starter for blower. Illumination by 4 feet tube light.fume hood is a ventilated enclosure in which gases, vapors and fumes are captured and removed from the work area. An exhaust fan situated on the top of the laboratory building pulls air and airborne contaminants through connected ductwork and exhausts them to the atmosphere...

How it works-:-

Fume Hood works by creating a continuous inward airflow that draws harmful vapors and fumes generated within the enclosed work area away from the user, capturing them and exhausting them to the outside through an exhaust system, effectively preventing exposure to hazardous chemicals while working in a laboratory setting; this airflow is maintained by a fan that pulls air through the hood and out to the exterior of the building.
Fume Hood has an air suction system that pulls in air through the open side and vents it outside or through a filtration system.
Some fume hoods have microcontrollers that can control the exhaust, fan, and lights.
The control panel can warn you about inconsistencies like smoke, fire, or too high a shutter.

Specification-:-

Temperature Range-: Between 5 to 100 Degrees Celsius.

Temperature Accuracy-: Within ±2°C.

Temperature Uniformity-: The consistency of temperature across the entire working area inside a fume hood.

Temperature controlled by-: The overall laboratory room temperature.

Technical Parameters

Modeld	Volume	Inn Chamber WxDxH (mm)	CAP	No. of shelves
MSI-BOD-1	90 Ltrs	450 x 450 x 500	3Cft.	2
MSI-BOD-2	180 Ltrs	550 x 550 x 700	6Cft	3
MSI-BOD-3	280 Ltrs	550 x 550 x 900	10 ft.	3
MSI-BOD-4	336 Ltrs	650 x 580 x 900	12Cft	3
MSI-BOD-5	420 Ltrs	700 x 650 x 900	15Cft	4

Uses For-:-

Protecting Laboratory Fume Hood workers from inhaling hazardous chemical vapors, gases, and dusts. They are used in a variety of research areas, including chemical, biological, and radiation. Fume hoods are used when working with chemicals that are: Flammable, corrosive, or irritating Reactive.Laboratory Fume Hood, Chemical Fume Hood typically protect only the user, and are most commonly used in laboratories where hazardous or noxious chemicals are released during testing, research, development or teaching.fume hood is a ventilated enclosure used to capture and remove hazardous fumes, vapors, and particles.When working with toxic, flammable, or explosive chemicals.When working with chemicals that have a significant inhalation hazard.When working with chemicals that could cause a fire hazard.When working with chemicals that could exceed exposure limits. ...