Bacteriological Incubators with Double wall chambers inner made of SS and outer of Mild Steel sheet duly powder coated with 2.5" thick glass wool insulation. Temperature is controlled by an imported thermostat, and working temperature ambient +5oC to 110oC with an accuracy of +/- 1oC and without thermometer...
Continue Reading
BOD Incubators are most versatile for Biochemical Oxygen Demand determinations. These Cooling Incubators are designed specially for close control of incubation/ storage temperatures. These are used for BOD test, storage of sensitive cultures, vaccines etc; culture of bacteria micro -organism and plant life; serum incubation studies and etc.
Continue Reading
Fume hood exterior: 1.2 mm G.I sheet with powder coat nish. Interior: Chemical and heat resistant with smooth nish, easy cleanable panels made of 6 mm thick FRP/Tiles. Bottom Cabinets with cupboard and one horizontal partition and shutters. Working table easy to clean & Chemical and heat resistant black granite.Single, verticle sliding type door.
Continue Reading
Hot Air Oven LCD temperature controller, PID controller, with over-temperature protection function, over-temperature protection system, four grades speed fan, adjustable for different and r equirements, horizontal air circulation through double air ducts with high efficiency uniformity, made of Stainless Steel SS 304, temperature Range +10℃ from room temperature to 300℃..
Continue Reading
Laminar Air Flow Cabinets with energy-efficient features that provide a sterile environment for numerous applications across a wide range of industries,Laminar Air Flow Cabinets best supplier in hyderabad, telangana, India. Laminar Flow principle involves double filtration of air through coarse pre-filters (upto 5 microns) and Hepafilter (down) to 0.3 microns) for filtration of biological and particulate contaminants.
Continue Reading
Orbital shaking incubators are laboratory instruments that are used to culture and agitate biological samples in a controlled environment. They are used in a variety of fields, including biotechnology, pharmaceutical, and life sciences. Microbial and cell culture cultivation, Protein expression, Solubility studies, General mixing, Enzyme reactions, and Tissue culture.Offered in different models.
Continue Reading
Shaking Incubator is a laboratory device that combines the functions of a standard incubator (maintaining a consistent temperature) with an orbital shaking mechanism, allowing for simultaneous temperature control and agitation of samples, primarily used to cultivate cells or microorganisms by enhancing aeration and mixing within the culture medium by shaking the containers at a controlled speed.
Continue Reading
Stability Chamber with energy-efficient features that provide a sterile environment for numerous applications across a wide range of industries.Introducing the Stability Chamber, a state-of-the-art laboratory equipment designed to meet your scientific needs. This roll-type incubator is crafted with durable stainless steel, ensuring reliability and provides Biological Demand testing.
Continue Reading
Heating and cooling mechanics are also called heating, ventilation and air conditioning technicians, refrigeration service technicians and HVACR mechanics, reflecting the variety of systems on which they work. They may work on residential, commercial or industrial..
Continue Reading
Cell Culture Equipment Incubators are necessary equipment for any laboratory conducting cell culture and tissue culture work. Incubators protect cells from changes in temperature, humidity, CO2 and O2. Temperature can be regulated by water or air jackets. Constant humidity is maintained by a humidity water t
Continue Reading
A laboratory water bath is used to heat samples in the lab. Some applications include maintaining cell lines or heating flammable chemicals that might combust if exposed to open flame. A water bath generally consists of a heating unit, a stainless steel chamber that holds the water and samples, and a control interface. Different types of
Continue Reading
Laboratory test chambers replicate a mini environment to test the effects of stresses such as extreme temperature, humidity, light, corrosion, and vibration on a sample or product. The information gained permits the identification and correction of any potential problems, ensuring that the product will perform as intended under harsh conditions.
Continue Reading
The centrifuge is a laboratory device that is used for the separation of fluids, gas or liquid, based on density. Separation is achieved by spinning a vessel containing material at high speed; the centrifugal force pushes heavier materials to the outside of the vessel. This apparatus is found in most laboratories from academic to clinical to research and used to purify cells,
Continue Reading
Water purification lab equipment ensures the quality of the water used in the lab to perform successful and reliable tests. Many water purification systems can handle a range of applications from basic buffer preparations to highly sensitive protocols such as HPLC, PCR, or uses that require precise TOC removal
Continue Reading
wash, sterilize and dry with one single process tanks , mechanical parts or other materials reduce number and volumes of the equipment installed in controlled environment reduce validation and maintenance costs simplify staff operational procedures load and unload from the same side of the equipment all those products that are already in a controlled contamination environment
Continue Reading
Laboratory mixers and shakers are instruments that help to form a homogenous mixture from more than one ingredient. Used in many types of industry, such as food and beverage, cosmetic, pharmaceutical, and electronics, as well as labs that deal with life sciences, wastewater treatment, and biotech, laboratory mixers and shakers are an important part of many labs. type of Mixers are
Continue Reading
Cleanroom or Clean Room: A controlled environment that has HEPA or ULPA filtered air entering the room. The cleanroom is classified by the number of micron size particles per cubic meter. Industries which use cleanrooms range from plastic injection molding, aerospace, semiconductor, pharmaceutical, research labs, medical device and compounding pharmacies. the cleanroom. They reduce the need for people to enter the cleanroom.
Continue Reading
A microscope is an instrument that makes an enlarged image of a small object, thus revealing details too small to be seen by the unaided eye. The most familiar kind of microscope is the optical microscope, which uses visible light focused through lenses.
© 2018. Maa Scientific International LLC
